Prevent Washer Repair by Following These Cleaning Tips

Posted on: No Comments
Washer-Repair-Blog 61938555

When needing a washer repair, several reasons could be causing the problem. When it comes to washer repair, you can trust the technicians at Able Appliance Repair to diagnose and repair any problems you have in your home or business. Even better – we offer in-home washer repair services!

Is your washing machine making some strange noises? Is your washer leaking in spots or producing a peculiar, smelly odor? No matter the issue, we’ve seen it all when it comes to washer repair. One washer repair could be different from the next, and since they all work with water, it could be a similar problem or something on the opposite end of the spectrum. All washing machines have water-related issues such as calcium buildup and rust. Here are some tips for cleaning your washing machine:

1.      Clean the Drum:
     a.      Empty the Machine: Make sure the washing machine is empty before you start cleaning.
     b.      Wipe Down the Drum: Use a damp cloth or sponge to wipe down the inside of the drum. Pay special attention to any visible stains or residue.
     c.      Run an Empty Hot Water Cycle: Set your washing machine to the hottest water temperature and run an empty cycle. During this cycle, you can add about a cup of distilled white vinegar to the drum. The hot water and vinegar will help dissolve soap scum, mineral deposits, and odor-causing bacteria.
     d.      Use Baking Soda: You can substitute vinegar with baking soda for a natural alternative. Add one cup of baking soda to an empty hot water cycle to help remove odors and build-up.
     e.      Scrub Gaskets and Seals: If your washing machine has rubber gaskets or seals, clean them with a mixture of water and mild detergent. These areas are prone to mold and mildew growth.
2.      Clean the Detergent Dispenser and Filter:
    a.      Remove and Clean the Dispenser Tray: Many washing machines have removable detergent and fabric softener trays. Remove them and wash them with warm, soapy water. Dry them thoroughly before reinserting.
    b.      Clean the Filter: Some washing machines have filters that collect lint and debris. Consult your machine’s manual for instructions on removing and cleaning the filter. This is typically located near the bottom of the machine.
3.      Maintain the Exterior:
     a.      Wipe Down the Exterior: Use a damp cloth or sponge to clean the outside of the machine, including the control panel and buttons.
     b.      Clean the Door: If your washing machine has a glass door, clean it with a glass cleaner to remove fingerprints and smudges.
4.      Leave the Door Open:
     a.      After each wash, leave the washing machine door open for a while to allow air to circulate. This helps prevent mold and mildew growth inside the drum.
5.      Regularly Check and Clean the Drain Pump:
     a.      Periodically, check the drain pump for debris or objects that may have become lodged. Refer to your machine’s manual for guidance on accessing and cleaning the pump.
6.      Check and Clean the Water Inlet Filters:
     a.      If you notice reduced water flow into the machine, check and clean the water inlet filters. These are usually located at the back of the machine where the water hoses connect.
7.      Use High-Efficiency Detergents:
     a.      High-efficiency (HE) detergents are formulated to work with modern washing machines. Using the right detergent can help prevent residue buildup.
8.      Perform Maintenance Washes:
     a.      Periodically, run an empty cycle with hot water and a washing machine cleaner product. These products are designed to remove residues and odors.

With these washing machine cleaning tips and incorporating regular maintenance into your laundry routine, you can ensure that your washing machine remains clean, odor-free, and in good working condition without washer repair.
Rest assured that the best in the business will complete your washer repair if you need one. Our outstanding technicians are constantly going through training to keep up to date with the changing technology in the industry. Since 1983, we have established a customer base of over two hundred thousand customers in the Kansas City Metro Area. You can read about us and our company on any reputable customer review site. We service the Kansas City metro region, including North Kansas City, Liberty, Gladstone, Platte Woods, Weatherby Lake, Independence, Leawood, Prairie Village, Lenexa, Olathe, Overland Park, Blue Springs, Lee’s Summit, and many more. We service all major brands of washing machines, and all service calls are FREE with qualified repairs! Contact us today!

Tags: , , , , ,